公司动态

当前位置:福州货架 > 资讯中心 > 公司动态 >

福州货架厂浅谈阁楼式货架

作者: -1 时间:2018-03-10 来源:未知
摘要:福州货架厂解说阁楼式货架能够做多高?首层多高合适? 一般,因为成人身高多在1.5以上,而楼面一般都会有10cm的高度(即厚度),阁楼式货架楼层距离在2.2-2.7m,顶层货架高度一般为2m左右...

    福州货架厂解说阁楼式货架能够做多高?首层多高合适?

一般,因为成人身高多在1.5以上,而楼面一般都会有10cm的高度(即厚度),阁楼式货架楼层距离在2.2-2.7m,顶层货架高度一般为2m左右,因而,二层阁楼式货架能够做成4.2米高,而三层阁楼式货架能够做成7.5米,这要求库房高度最好是4米以上,8米以下。
阁楼式货架


同时,考虑职作业业的便利性,阁楼式货架的第一层的净高度(最低高度)不能低于1.9米,如果阁楼太低,仓储人员在这样的仓储环境下作业久了,必然形成作业压抑。再假定净高度1.7米,那么在阁楼里边作业的人员,进去都得弯着腰或低着头,简单形成身体劳损。这完全违反了货架规划的合理性准则。

福州货架厂解说阁楼货架搭配使用的仓储设备有哪些?

阁楼货架是一种充分使用库房上层空间的简易货架。在已有的货架或作业场所上缔造一个中心阁楼以添加贮存的面积。阁楼楼板上一般能够放置轻型以及中小件货品或存储期长的货品,可用叉车、输送带、提升机、电动葫芦或升降平台提升货品。阁楼上一般选用轻型小车或托盘牵引小车作业。

福州货架厂解说阁楼货架底层选用什么货架做支撑?怎样选?

阁楼货架体系,一般使用中型搁板式货架或重型搁板式货架作为主体支撑加上楼面板。依据货架单元的总负载分量来决议选用何种货架,楼面板一般选用冷轧型钢楼板、斑纹钢楼板或钢格栅楼板。近几年多用冷轧型钢楼板,它具有承载能力强、整体性好、承载均匀性好、精度高、外表平坦、易确定等优势,有多种类型可选,而且易匹配照明体系,存取、办理均较为便利。

福州货架厂解说阁楼货架在哪些职业用的多?

阁楼式货架具有空间使用最大化的特色,可贮存多种类型物品。在轿车零部件领域、轻工业、电子职业和轿车4S店应用较多。可依据各种装置状况及实践场所需求规划二层和多层阁楼,全拼装式结构,可在现场随意组合,轻松安装,无需焊接,拆开便利灵敏。

 

How high is the attic shelf to explain how high the first floor is suitable for the Fuzhou shelf factory?

Usually, the adult height in more than 1.5, while the floor generally have 10cm height (i.e. thickness), the mezzanine floor space in 2.2-2.7m, the top shelf height is generally about 2m, therefore, the two layer of the attic shelf can be made into a 4.2 meters high, and three loft style shelves can make 7.5 meters. This is the best for warehouse height of 4 meters, 8 meters.

At the same time, considering the convenience of staff work, the net height (minimum height) of the first floor of the attic shelf can't be less than 1.9 meters. If the attic is too low, warehousing staff will work long in such warehousing environment, which is bound to cause work depression. Then suppose that the net height is 1.7 meters, then the staff who work in the attic must bend their waist or lower their heads, which can easily cause physical strain. This is completely contrary to the rationalization of shelf design.

What are the storage equipment used in the attic shelf with the Fuzhou shelf factory?

The attic shelf is a simple shelf that makes full use of the upper space of the warehouse. Build an intermediate attic on an existing shelf or work site to increase the storage area. Generally, light and small and medium-sized goods or long storage goods can be placed on the floor of the attic, which can be lifted by forklift truck, conveyor belt, hoist, electric hoist or lifting platform. The attic usually uses a light car or tray to pull the car.

What shelving is the bottom shelf of the attic shelf in Fuzhou shelving factory to support? How do you choose?

The attic shelf system usually uses a medium shelf or heavy shelf as the main support and the upper floor panel. According to the total load weight of the shelf unit, it decides which shelves to choose. The floor slab usually selects cold rolled steel floor slab, pattern steel floor board or steel grid floor slab. In recent years, cold rolled steel floor has been widely used. It has many advantages, such as strong bearing capacity, good integrity, good load uniformity, high accuracy, smooth surface and easy locking. It has many kinds of options, and it is easy to match lighting system, and access and management are more convenient.

Fuzhou shelf factory explain the attic shelves in which industries are more used?

The attic shelf has the characteristics of maximization of space utilization, which can store various types of goods. It is widely used in automotive parts, light industry, electronic industry and automobile 4S store. We can design two storey and multi-storey attic based on various installation conditions and actual site needs. The fully assembled structure can be assembled freely on site, easy to assemble, no need for welding and convenient and flexible disassembly.

资讯中心

联系我们
_联系我们

销售热线:18659553121/孙小姐

电话:18659558084/孙先生

QQ:867018798点击这里给我发消息

地址:福建省晋江市安海镇清机路279宝龙豪苑小区

[向上] 
在线客服

在线咨询

咨询电话:
18659558084
二维码

访问手机站